Vauxhall Mokka-e windscreen replacement — booked online.

What to expect during your Vauxhall Mokka-e windscreen replacement

Booking your Mokka-e windscreen replacement takes just a few steps.

1. 1

   Complete a quick online quote using our guided variant quiz — takes about a minute.

2. 2

   Our parts check team confirms your exact windscreen specification, including camera and sensor details.

3. 3

   You're matched with an approved technician in your area who can handle ADAS calibration.

4. 4

   On fitting day, your windscreen is replaced and the camera is calibrated indoors at a workshop (the full job stays in one location).

5. 5

   Your technician confirms the drive-away time before you leave — typically the same as non-ADAS jobs, since calibration runs in parallel with adhesive cure.

6. 6

   You receive a two-year warranty covering workmanship and glass quality.

From booking to fitted glass, you're supported by our network of trusted local specialists.

What features does your Mokka-e have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Acoustic (Noise reduction)1

  2021–2026

  Acoustic glass reduces cabin noise for a quieter, more comfortable ride.

  What it means

  Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.

  How to tell

  Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.

  Replacement impact

  Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.

• Green1

  2021–2026

  Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.

  What it means

  Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.

  How to tell

  The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.

  Replacement impact

  Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.

• Mono Camera1

  2021–2026Calibration varies by vehicle

  A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.

  What it means

  A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.

  How to tell

  Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.

  Replacement impact

  When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.

  Calibration mix across our Vauxhall variants

  • 1Dynamic

  We confirm the exact procedure for your specific vehicle when you book.

• Rain Sensor1

  2021–2026No calibration after replacement

  Your wipers automatically activate when rain falls on the windscreen.

  What it means

  A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.

  How to tell

  Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.

  Replacement impact

  Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.

• Static Camera Calibration Process1

  2021–2026Static calibration required

  Static calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.

  What it means

  Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.

  How to tell

  Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu.

  Replacement impact

  When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.

• Vin Notch1

  2021–2026

  A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.

  What it means

  A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.

  How to tell

  Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.

  Replacement impact

  When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.

• Vauxhall Corsa From £221
• Vauxhall Astra From £234
• Vauxhall Combo From £253
• Vauxhall Vectra From £272
• Vauxhall Meriva From £272
• Vauxhall Adam From £281
• Vauxhall Insignia From £282
• Vauxhall Agila From £283
• Vauxhall Astra-GTC From £285
• Vauxhall Tigra From £286
• Vauxhall Zafira From £298
• Vauxhall Frontera From £311