EB
Emma B.
Verified on Trustpilot15 May 2026
I would highly recommend this company
I would highly recommend this company, good customer service, very good technician and one very happy customer
Peugeot 1007 windscreen replacement — booked online.
Peugeot 1007 windscreen replacement quoted in under 60 seconds, fitted by approved fitters near you — booked online in under two minutes.
Prices from £331 to £423
4.82 / 5 ·
1,456 Trustpilot reviews
Get your quote
Under 60 secondsMake
Peugeot
Model
1007
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Peugeot 1007 windscreen price, by year
Pricing varies based on your variant's original glass specification — whether it carried a rain sensor, solar-control coating, or green tint affects the parts cost. Later 1007 models with added features typically sit at a different price point than earlier base variants, and acoustic laminated options (where fitted) carry a premium.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2009 | £331 — £423 | 3 variants | Price my 2009 |
| 2008 | £331 — £423 | 3 variants | Price my 2008 |
| 2007 | £331 — £423 | 3 variants | Price my 2007 |
| 2006 | £331 — £423 | 3 variants | Price my 2006 |
| 2005 | £331 — £423 | 3 variants | Price my 2005 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 1007s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Recent UK Car Glass reviews
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
What to expect during your Peugeot 1007 windscreen replacement
Booking your 1007 windscreen replacement is a quick, guided process.
- 1
Answer a few questions about your car (year, features) via our online widget to get an instant quote.
- 2
Check the quote and book your preferred date and time — takes under two minutes total.
- 3
We match you with a local, approved fitter who'll confirm the exact glass variant and any options during a pre-visit parts check.
- 4
Your fitter arrives at your address (or workshop, your choice) and replaces the windscreen — typically 45–90 minutes of their time.
- 5
We confirm your two-year warranty on workmanship and glass quality before you drive away.
From quote to fitted glass, the whole journey is handled by trusted specialists on our network.
Mobile fitting or workshop visit for your 1007?
The 1007 pre-dates Peugeot's front-camera ADAS systems, so no calibration is required after windscreen replacement. This means mobile fitting at your home or workplace is the standard option — your fitter arrives with all equipment needed to complete the job on site.
You're welcome to choose a workshop appointment if you prefer, but it's not a necessity for this model.
We confirm the specific answer for your vehicle when you book.
What features does your 1007 have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Clear2
2005–2009Calibration varies by vehicleClear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Calibration mix across our Peugeot variants
- 1None
We confirm the exact procedure for your specific vehicle when you book.
Coating2
2005–2009Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
What it means
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
How to tell
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
Replacement impact
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Green1
2005–2009Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Rain Sensor1
2005–2009No calibration after replacementYour wipers automatically activate when rain falls on the windscreen.
What it means
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
How to tell
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Replacement impact
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Solar Control1
2005–2009Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
About the Peugeot 1007
The Peugeot 1007 was produced from 2005 to 2009 as a compact MPV with a distinctive sliding-door design. Early examples carry straightforward laminated windscreens, though some variants from the later production run feature green-tinted glass and additional comfort options like rain sensors.
These models pre-date Peugeot's front-camera ADAS era, so windscreen replacement is straightforward — no camera recalibration needed. Glass matching your factory specification covers tint (clear, green, or coated), and any rain-sensing or solar-control features present on your specific variant.
Other Peugeot models
Own a different Peugeot? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.