Emma B.
Verified on Trustpilot15 May 2026
I would highly recommend this company
I would highly recommend this company, good customer service, very good technician and one very happy customer
Mercedes-Benz SLS AMG windscreen replacement — instant quote in under 60 seconds, fitted by approved fitters across the UK — booked in under two minutes.
Make
Mercedes
Model
SLS
No card required · Free to quote
Pricing reflects the SLS's premium specification and the acoustic-laminated construction of its windscreen. All variants carry identical feature sets — acoustic glass, rain sensor, antenna, and encapsulation — so variation stems mainly from calibration complexity and technician location rather than trim or generation splits.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2014 | £992 — £992 | 1 variant | Price my 2014 |
| 2013 | £992 — £992 | 1 variant | Price my 2013 |
| 2012 | £992 — £992 | 1 variant | Price my 2012 |
| 2011 | £992 — £992 | 1 variant | Price my 2011 |
| 2010 | £992 — £992 | 1 variant | Price my 2010 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older SLSs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Mercedes-Benz SLS windscreen replacement is straightforward and takes just a couple of minutes online.
Answer a short quiz about your SLS (year and key features) to get an instant quote — completed in under 60 seconds.
Choose your preferred fitting location: mobile visit at home or a local workshop.
Proceed to checkout and confirm your booking with a contact number.
We match you with an approved fitter in your area and send confirmation with their contact details.
On the day of fitting, your fitter removes the damaged windscreen, inspects the frame for corrosion, and bonds the replacement glass using Mercedes-approved polyurethane adhesive.
Your fitter confirms the minimum drive-away time before you leave — typically a few hours depending on the adhesive used and weather conditions.
All replacements come with a two-year warranty on workmanship and glass quality.
Most SLS windscreen replacements are fitted mobile at your home or workplace. However, the SLS produced during 2010–2014 predates Mercedes' widespread ADAS integration, so calibration is not typically required after windscreen replacement — making mobile fitting the standard choice.
If your SLS is fitted with optional advanced driver-assistance systems (such as the Distronic adaptive cruise or lane-keeping features), static camera calibration may be necessary and would be completed at a local workshop as part of the same booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Mercedes-Benz SLS, produced from 2010 to 2014, is an iconic grand tourer powered by a naturally aspirated V8 engine. Its windscreen is laminated and engineered to meet Mercedes' structural and safety standards, incorporating acoustic damping to reduce cabin noise and a rain sensor for automatic wiper activation.
All SLS variants in our catalogue feature an antenna laminated into the windscreen for radio reception, encapsulated trim pre-fitted at the factory, and a VIN notch along the base for vehicle identification. The glass arrives as a complete sealed unit with its fitting hardware ready to bond into place.
Own a different Mercedes? We've got you — every variant, every year.
The questions customers ask us most often.