JS
John S.
Verified on Trustpilot10 Aug 2026
Excellent service from first enquiry…
Excellent service from first enquiry through to fitting. I was sceptical at first and carried out various checks. All proved positive. 11/10. Highly recommended.
FIAT Stilo rear window replacement — booked online.
Rear window replacement for your Fiat Stilo (2002–2007) — instant quote across 6 variants in under 60 seconds, fitted by approved fitters near you.
Prices from £281 to £522
4.81 / 5 ·
1,472 Trustpilot reviews
Get your quote
Under 60 secondsMake
FIAT
Model
Stilo
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, factory-spec match
- 2-year workmanship warranty
FIAT Stilo rear window price, by year
Price variation across Stilo variants depends mainly on whether solar-control glass is fitted and the complexity of any integrated features like brake-light circuitry. Models with solar-control glazing carry slightly higher replacement costs than standard-tint variants.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2007 | £281 — £522 | 6 variants | Price my 2007 |
| 2006 | £281 — £522 | 6 variants | Price my 2006 |
| 2005 | £281 — £522 | 6 variants | Price my 2005 |
| 2004 | £281 — £522 | 6 variants | Price my 2004 |
| 2003 | £281 — £522 | 6 variants | Price my 2003 |
| 2002 | £281 — £294 | 3 variants | Price my 2002 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Stilos can still be booked.
Recent UK Car Glass reviews
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,472 Trustpilot reviews.
What to expect during your FIAT Stilo rear window replacement
Booking your Stilo rear window replacement online takes about two minutes — the process is straightforward and transparent.
- 1
Complete a quick online quote using our widget — we'll identify your exact variant and show you upfront what to expect.
- 2
Choose your appointment time and confirm your booking in under two minutes.
- 3
Our parts team checks your vehicle's specification to confirm the exact glass type — this typically happens within 24 hours.
- 4
A fitter from our network is matched to your job and confirms their arrival time.
- 5
On the day, your fitter arrives with your replacement glass, removes the shattered rear window, and fits the new one — typically taking 30–60 minutes of their time.
- 6
After fitting, we recommend a professional interior valet to remove any small glass shards that may have lodged in the boot or under trim — this isn't part of the standard service but ensures a completely clean finish.
- 7
Your replacement comes with a two-year warranty covering workmanship and glass quality.
From booking to driving away, most jobs are completed within a couple of hours — times vary based on your location and fitter availability.
Mobile fitting or workshop visit for your Stilo?
Most Stilo rear window replacements happen at your home or workplace via mobile fitting — the 2002–2007 generation predates ADAS camera systems, so calibration isn't a factor.
Your fitter brings all tools and equipment needed for a quality seal on the driveway. If weather conditions are poor or your location is difficult to access, a workshop visit can be arranged instead.
We confirm the specific answer for your vehicle when you book.
What features does your Stilo have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated Rear Windscreen6
2002–2007Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
What it means
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
How to tell
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement impact
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Green5
2002–2007Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar Control5
2002–2007Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Brake Light3
2002–2007A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
What it means
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
How to tell
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
Replacement impact
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Dark Green1
2003–2007Dark green tinted rear and side glass that's noticeably darker than the front windscreen but still see-through in daylight.
What it means
Dark green tint is a factory-applied colour to the rear window and side windows on some vehicles. It serves both aesthetic and functional purposes: it reduces glare and heat from sunlight, provides a degree of privacy without completely obscuring the interior, and contributes to the vehicle's overall design. Unlike privacy glass (which is much darker and difficult to see through from outside), dark green tint maintains reasonable transparency while still offering a tinted appearance.
How to tell
Look at your rear window and rear side windows in daylight. If they appear noticeably darker and greenish in tone compared to your front windscreen, you have dark green tint. The tint will be clearly visible when you look at the vehicle from outside, but you'll still be able to see through to the interior in normal daylight. Check your vehicle documentation or ask your dealership if you're uncertain.
Replacement impact
Replacement glass must match the original dark green tint specification to maintain the vehicle's appearance and light-control properties. We source OEM or OE-equivalent tinted glass to the correct colour specification. Tinted glass is available from stock for most common vehicles, though lead times may occasionally be slightly longer than untinted variants. Installation and cure procedures are identical to standard glass; tint does not affect fitting time or drive-away windows.
Open1
2003–2007An opening pane with hinged hardware, typically on rear quarters or van sides.
What it means
An opening glass pane is a hinged or pivoting section of bodyglass designed to swing or tilt outward for ventilation or access. Commonly found on rear quarters of estates or vans, and on van side panels. Unlike fixed side windows or windscreens, opening panes are part of the vehicle's passive ventilation system and allow airflow without opening a door or window. The hinge and frame hardware are integral to the feature's function.
How to tell
Check your vehicle's side and rear quarter panels for hinged glass sections that swing outward. Ask your dealer or service centre whether your model includes rear quarter vents or van-side opening panels. Your handbook will list ventilation features. Opening panes are visually distinct from sliding or rolling windows — they pivot on visible hinges rather than moving vertically or horizontally.
Replacement impact
UKCG handles opening-pane replacement on a bespoke basis — please contact us for a quote rather than using the automated quote tool. Replacement includes the glass pane and matching hinge hardware where supplied. Fitting time is typically brief as there is no adhesive cure or calibration required. The pane is held in place by mechanical hinges and seals, so you can use the vehicle immediately after fitting.
About the FIAT Stilo
The Fiat Stilo was produced from 2002 to 2007 across a single generation, offering practical five-door family hatchback design with a distinctive rear silhouette. Most variants feature a green-tinted rear window as part of the factory specification, with solar-control glass fitted to the majority of models to help reduce cabin heat.
Rear window replacement on Stilo models is straightforward, as this generation predates modern ADAS camera systems. The rear glass is typically toughened, which means it will shatter into small pieces if broken — cleanup is a significant part of the fitting job.
Other FIAT models
Own a different FIAT? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.