AC
Antony C.
Verified on Trustpilot19 Apr 2023
We’re able to accommodate my lapse
We’re helpful even whenI made a mistake. A narrower time window would be helpful
Vauxhall Zafira windscreen replacement — booked online.
Instant quote across 19 Vauxhall Zafira variants from 1998 onwards, fitted by approved fitters — booked in under two minutes.
Prices from £298 to £1,064
4.82 / 5 ·
1,456 Trustpilot reviews
Get your quote
Under 60 secondsMake
Vauxhall
Model
Zafira
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Vauxhall Zafira windscreen price, by year
Prices vary significantly across the Zafira range, driven mainly by generation and the presence of camera systems. Earlier models without ADAS cameras are typically the most affordable, while newer variants with rain sensors, encapsulated trim, and camera brackets carry higher replacement costs due to increased complexity and calibration requirements.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2019 | £336 — £1,064 | 3 variants | Price my 2019 |
| 2018 | £336 — £1,064 | 3 variants | Price my 2018 |
| 2017 | £336 — £1,064 | 4 variants | Price my 2017 |
| 2016 | £336 — £1,064 | 4 variants | Price my 2016 |
| 2015 | £336 — £1,064 | 4 variants | Price my 2015 |
| 2014 | £336 — £1,064 | 4 variants | Price my 2014 |
| 2013 | £336 — £1,064 | 4 variants | Price my 2013 |
| 2012 | £298 — £1,064 | 8 variants | Price my 2012 |
| 2011 | £298 — £1,064 | 8 variants | Price my 2011 |
| 2010 | £298 — £480 | 4 variants | Price my 2010 |
| 2009 | £298 — £480 | 4 variants | Price my 2009 |
| 2008 | £298 — £480 | 4 variants | Price my 2008 |
| 2007 | £298 — £480 | 4 variants | Price my 2007 |
| 2006 | £298 — £480 | 4 variants | Price my 2006 |
| 2005 | £298 — £480 | 7 variants | Price my 2005 |
| 2004 | £324 — £378 | 3 variants | Price my 2004 |
| 2003 | £324 — £378 | 3 variants | Price my 2003 |
| 2002 | £324 — £378 | 3 variants | Price my 2002 |
| 2001 | £324 — £378 | 3 variants | Price my 2001 |
| 2000 | £324 — £378 | 3 variants | Price my 2000 |
| 1999 | £324 — £378 | 3 variants | Price my 1999 |
| 1998 | £324 — £324 | 1 variant | Price my 1998 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Zafiras can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
What Vauxhall Zafira owners say
Showing 3 reviews from verified Vauxhall Zafira owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
What to expect during your Vauxhall Zafira windscreen replacement
Booking a Zafira windscreen replacement through UK Car Glass is straightforward and takes just a couple of minutes online.
- 1
Answer a few quick questions in our online quote tool to identify your exact variant — generation, trim features, and glass specification.
- 2
We match you with a local approved fitter from our network and confirm availability and pricing.
- 3
Your fitter carries out a final parts check before the job to ensure glass, brackets, and any hardware are correctly specified.
- 4
On the day, the technician removes the old windscreen, fits the replacement, and completes any calibration required in-situ — typically 45–90 minutes of active work, depending on your variant.
- 5
If your Zafira has a camera system, static calibration is completed at a workshop to confirm lane-keeping and safety features are recalibrated.
- 6
Your fitter confirms the minimum drive-away time before you leave — usually the same day.
All replacements come with a two-year warranty covering workmanship and glass quality.
Mobile fitting or workshop visit for your Zafira?
Most Zafira windscreen replacements can be fitted at your home or workplace through our mobile service. However, if your model has a forward-facing camera system for driver assistance, the job is scheduled at a workshop so static calibration can be completed safely after the glass is fitted.
This calibration—where the camera relearns lane lines and road features—is essential for safety and takes place in a controlled environment with proper target boards and diagnostic equipment.
We confirm the specific answer for your vehicle when you book.
What features does your Zafira have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Vin Notch11
1998–2019A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
What it means
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
How to tell
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
Replacement impact
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Green8
1998–2019Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Rain Sensor5
2005–2019No calibration after replacementYour wipers automatically activate when rain falls on the windscreen.
What it means
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
How to tell
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Replacement impact
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Solar Control5
1998–2019Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Blue Sun Strip4
1999–2012A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
What it means
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
How to tell
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
Replacement impact
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Clear3
1999–2012Calibration varies by vehicleClear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Coating3
1999–2012Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
What it means
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
How to tell
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
Replacement impact
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Bracket For Safety Features2
2011–2019Calibration varies by vehicleThe moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Dynamic Camera Calibration Process2
2011–2019Calibration varies by vehicleDynamic calibration uses road driving to recalibrate your camera after windscreen replacement.
What it means
Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.
How to tell
Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.
Replacement impact
After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.
Heat Absorbing PVB2
2011–2019Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.
What it means
Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.
How to tell
Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.
Replacement impact
Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.
Mono Camera2
2011–2019Calibration varies by vehicleA single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
What it means
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
How to tell
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
Replacement impact
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
About the Vauxhall Zafira
The Vauxhall Zafira has evolved across multiple generations since 1998, with windscreen design reflecting the changes in family-car safety standards and technology. Early models feature straightforward laminated windscreens with a VIN notch and green tint, while later variants introduce rain sensors and encapsulated trim for a cleaner fit.
From the mid-2010s onwards, some Zafira models began incorporating camera-equipped windscreens for forward-facing driver assistance. These carry a bracket and sensor shroud at the top of the glass and require static camera calibration after fitting — a process completed at a workshop to ensure lane-keeping and collision-avoidance systems recalibrate accurately.
Other Vauxhall models
Own a different Vauxhall? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.